Aqua-Flow 2.13 DORW4100 18.02.2013 7 / 8
Wiring:
Please note:
With this product, the rate at which the mains water flows into the rainwater tank is generally
slower than the speed at which the submersible pump extracts water from the tank. If you are
watering the garden and the rainwater tank does not contain enough water, the pump may
deactivate due to the insufficient water level, despite the fact that the tank is being
replenished with mains water. Some pumps then have to be reset electrically (by switching on
and off again).
Safety advice:
Throughout the installation/assembly process, the system must be disconnected from the
mains power supply.
Maintenance:
The level sensor must be checked for scaling on an annual basis (during the tank inspection)
and cleaned as necessary.
Scope of delivery:
-
Module box Aqua-Flow 2.13
-
230V AC to 12V power supply with 1.5 m connecting cable
-
Level sensor with 15 m cable
-
Level sensor bracket (for DN 100 inlet pipe)
-
Wall mounting materials
REWATEC GmbH February 2013
REWATEC reserves the right to make technical changes to this documentation. All rights reserved. REWATEC is not
liable for printing errors.
The contents of the installation and assembly instructions are part of the warranty conditions.
Connection for 15
m level sensor
Connection for
mains adapter for
230V AC to 12V
power supply
