MAINTENANCE
Being an electric-powered vehicle, your Revvi is a relatively low
maintenance machine. However, it is important to properly care for
the unit to keep it operating properly and safely. Below are items
that you will need to care for on a regular basis.
STORE INSIDE, OUT OF THE WEATHER
WARNING
IT IS EXTEREMELY IMPORTANT TO ALWAYS STORE YOUR
REVVI INDOORS AND OUT OF THE WEATHER. THE ELECTRICAL
SYSTEM IS COVERED BUT SHOULD NOT BE CONSIDERED SEALED.
WATER CAN CAUSE SERIOUS DAMAGE TO THE POWER TRAIN AND
CREATE A DANGEROUS SITUATION WATER DAMAGE WILL VOID
YOUR WARRANTY
.
DRIVE CHAIN TENSION
The drive chain transmits power from the motor to the rear wheel.
To work properly it must be lubricated and properly tensioned at all
times.
Check the tension on the drive chain by moving it up and down
approximately halfway between the sprockets. There should be no
more than 1/2” vertical slack in the chain. If the chain seems too
loose, it may be in danger of coming off while riding.
To adjust the chain tension, follow the steps outlined below:
1.
Be sure that the Revvi is parked on a flat level surface, is
switched off and leaning on the kickstand.
2.
Using a spanner, loosen the rear wheel axle nuts on each side.
3.
After the axle nuts are loosened, use a spanner to turn the
sprocket side tensioner bolt clockwise (to tighten) about one
turn, then repeat this process on the other side tensioner bolt.
