Revv
Owner’s Manual
contents
1.1 Warranty
1.2 Safety Instructions & Warnings
1.3 Set up & Power up
Front Panel Layout
2.1 Input
2.2 Channel One (Clean)
2.3 Channel One (Crunch)
2.4 Channel Two (Dirt)
2.5 Master Volume Control
2.6 Depth & Presence
2.7 Function Controls
A - Masters Switch
B - Mute Switch
C - Serial FX Loop Switch
D - Store Switch
2.8 Standby & Power Switches
Rear Panel Layout
3.1 Main Power Connection
3.2 Main & HT Fuses
3.3 Bias Test Points
3.4 Power Tube Fuses
3.5 Line Out
3.6 Impedance & Speaker Jacks
3.7 FX Loop Connections
3.8 MIDI Connections
3.9 Foot Switch Connection
3.10 Speaker Cab Lighting
Serial Effects Loop
4.1 FX Loop On/Off
4.2 SEND Level Control
4.3 FX Loop In/Out
4.4 FX Loop Hook up
Tubes & Bias
5.1 Power Tubes
5.2 Power Tube Sockets & Tube Type
5.3 Preamp Tubes
5.4 Power Tube Bias
MIDI
6.1 Phantom Power
6.2 Omni Mode
6.3 MIDI Channel Setting
6.4 MIDI Program Change
6.5 MIDI Controllable Functions
6.6 Continuous Controller
Commands (CC)
Foot Switch
7.1 Hook Up
7.2 Control Mode
7.3 Preset Mode
7.4 Switching Between Modes
7.5 Mute & the Foot Switch
7.6 Mute & Preset Mode
7.7 Memory Reset
Amp Memory Reset
8.1 Amp Memory Reset (Factory
Default)
1.0
