network receiver
Operation
62
62
Short Time Alarm
Using the S118's timer, you can enjoy a
short nap or a siesta. Start up the
network receiver as usual and select a
music source. Now using the the timer,
you can define how long it should be
before the S118 switches itself back on
again. You can choose a time between
10 and 60 minutes. The time shown as
Wake-up time indicates when the
receiver will switch back on.
Confirm your settings with the OK button.
The following display appears on the
S208 remote control for about 5 seconds
as confirmation: see figure top right.
Then the connection to the receiver is
dropped and the S118 switches itself off.
The Status LED on the network receiver
shows permanently red
after being
switched off if a timer is active.
After the pre-defined time, the S118
starts up automatically with the
previously selected source. Now, using
the
hot keys
or "
Select device
", you can
establish a connection to the receiver.
The receiver displays the following as a
welcome screen:
