Presentation
network receiver
11
Explanation of the connections
Name
Function
AC Power
Power cable connection / 100-240 VAC/ 50-60Hz
Coax
Digital audio input through coaxial cable – max. 192 kHz
Optional
1
Antenna input for an optional FM/DAB module.
Optimised for cable reception.
Factory
2
Reset button for restoring factory defaults. Can be activated
using a paper clip.
Loudspeaker (Right + Left)
Speaker connection / Impedance: at least 4
Ω
Network
RJ45 network connection for wired audio streaming (iRadio,
NAS) and for App control
Optical
Digital audio input through fibre optic – TOSLink – max. 96 kHz
Start up
Start button for start-up from the standby state. Quick Start
function is activated for permanent control through an App.
USB
3
/ iPod / iPhone
USB B input for the USB data carriers or iPod/iPhone
connection.
Wi-Fi
WLAN antenna connection for wireless audio streaming
(iRadio, NAS) and App control, supplied with the unit
1
not supplied with the S118
2
Unplug the S118 from the mains – keep pressing the Factory button –
plug in the S118power cord to the mains. Release the Factory button after 5 secondes.
3
USB storage*
Use the USB connection only for USB storage up to 32 GB, as large amount of data can lead
to long read-in terms. Sometimes a capturing of content is even impossible.
A network hard drive (NAS) with UPnP service is recommended for a large music collection
.
*
with FAT16/32 formatting
