RevolutionAIR Avanty, Instruction Manual

Page: 8 / 16

8
Turn on the air compressor On/Off switch (5)
and the unit will start pumping air into the tyre.
The air pressure will be indicated by the
compressed air pressure gauge (2).
Once the desired air pressure is reached simply
press the air compressor On/Off switch to off
and disconnect the air hose.
Note: When inflating tyres always use the
vehicle manufacturers recommended guidelines.
If you require to inflate any kind of sports
equipment, please use the supplied adaptor
accessories. To fit the adaptors simply place the
chosen adaptor into the connector on the end of
the air hose and lock into place by pushing down
on the lever.
Never inflate above the manufacturers
recommended level.
USING THE INVERTER
The unit is equipped with a power inverter, this
can be use to power a range of mains powered
electrical equipment up to 300W. Turn the power
inverter on using the Inverter/USB switch (11),
the battery status indicator (16) will illuminate to
indicate there is power to the outlet socket.
Alternatively you can use the USB charging
function to charge equipment such as mobile
phone and satelitte navigation systems (USB
cable not supplied).
WORK LIGHT FACILITY
The unit is equipped with a work light. This
facility is useful when working on a vehicle in the
dark at a roadside breakdown. To operate the
light press in the LED light On/Off switch (3).
MAINTENANCE
Always inspect the unit before use to ensure the
cables are in perfect condition and the clamps
are clean and free from corrosion.
Keep the unit clean by wiping with a dry cloth.
DO NOT use solvents as a cleaning agent.
Keep the unit at high or full charge status at all
times.
REMOVING THE BATTERY FOR SAFE
DISPOSAL
1. Ensure that all switches are in the OFF
Position
2. Remove the two black clamps on the base by
removing the 4 screws
3. Remove the 6 screws securing the front and
rear casing halves
4. Separate the front and rear casing halves
from the end mouldings.
5. Remove the battery from the front casing and
disconnect the battery terminals using an M8
Spanner.
The battery can now be disposed of in an
environmentally safe way.
Technical RAPS300
Specification
Jump Starter
Battery voltage 12V d.c.
Starting power 400Amps
Peak power 900Amps
Battery rating 17Ah Sealed
Lead Acid,
Rechargeable
Power Inverter
Input voltage 10.5V-15V d.c.
Low voltage input
warning
9.8V-10.2V d.c.
Static current <0.5A
Output voltage 230V~50Hz
Continuous output
power
240W
Overload output
protection
65ºC-75ºC