Robotic Pool Cleaner
REVOLUTION I
| Operating Instructions
2
Robotic Pool Cleaner BASIC 2
Operating Instructions
1.
INTRODUCTION
Thank you for purchasing a
REVOLUTION
Pool Cleaner.
We are sure that your
REVOLUTION
Robotic Pool Cleaner will provide you with reliable, convenient
and
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing
brush
enhance maximum pool hygiene.
The Robotic Pool Cleaner deliver advanced cleaning technologys, long lasting
performance and
easy maintenance.
2.
SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m / 2.6ft
Maximum depth: 5m / 16.4ft
3. WARNINGS AND CAUTIONS
3.1. Warnings
•
Use the originally supplied power supply only
•
Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
•
Keep the power supply out of standing water
•
Position the power supply at least 3m / 10ft away from the edge of the pool
•
Do not enter the pool while the pool cleaner is working
•
Unplug the power supply before servicing
3.2. Cautions
Use the Pool Cleaner in the following water conditions only:
Chlorine
Max 4 ppm
pH
7.0 - 7.8
Temperature
6 – 34°C / 43-93°F
NaCl
Maximum = 5000 ppm
CAUTION
• Input - 100-250 AC Volts
• 50-60 Hertz
• 180 Watt
• Output - <30 VDC
• IP 54
Digital “Switch-Mode” Power Supply
Power Supply
Summary of Contents for Revolution l
Page 2: ......
