5
EN
CONTROL PANEL
CONTROL PANEL OFFERS THREE CONTROL MODES :
• In case of emergency arising during the opera-
tion of the machine, the machine stops all op-
erations and open the vacuum cover once the
emergency stop button is pressed.
• When the emergency stop button is pressed, the
machine will immediately stop the running
program and proceed with the next procedure
by memory until cooling down and opening of
the vacuum cover after sealing. For a vacuum
pumping and proceeds
with inflating – cooling down – sealing and cover
opening procedures.
• PC control panel with ten groups of memories :
The control panel provides the above two con-
trol functions as well as ten different groups of
memories of control program for user’s free
selection in operation.
PREPARATION BEFORE USE
Installation
1. Before operation, please read through the In-
struction Manual about each operation rules and
the safety precaution.
2. You must fill the vacuum pump with NO.68 or
NO.100 vacuum pump before use (When the ma-
chine is placed at a horizontal position, the oil lev-
el should keep at 1/2 – 1/3 of oil window.) When
running, the oil level should not be lower than 1/3
height of oil window. Do not fill with too much oil to
avoid over flow.
3. The machine should be placed horizontally in
good ventilation and light without corrosive gas and
3
4
8
2
2
2
3
4
8
2
2
2
Turn on
Time display
High temperature indicator light
Middle temperature indicator light
Working indicator light
Low temperature indicator light
Vacuum section indicator light
Filling indicator light
Sealing indicator light
Cooling indicator light
Vacuum meter
Sealing temperature button
Time adjustment button (down)
Time adjustment button (up)
Setting button
Emergency stop button
