REVOLUTION ELECTRONICS
www.revolutionelectronics.com
Cypress, California 90630
Orange Wire
Connect this wire to a switched power voltage source. Voltage to this wire
needs to turn on and off with the ignition key.
Blue Wire
Connect this wire to the door switch lead. This wire senses the door opening.
Attach the supplied T-tap connector to the wire running from the door switch up
to the dome light. Next attach the insulated male connector to the end of the
green wire and insert into the T-tap. Voltage to this wire should read 0V when
the door is closed (dome light off) and +12V when the door is open (dome light
on.)
Purple Wire
Connect this wire to the radio power lead. This wire will get power from the red
wire whenever the radio is to be turned on. If the radio power lead has a female
terminal to plug into the fuse box, a female terminal can be crimped to this purple
wire to make installation easier. The controller contains an internal resettable
7.5A fuse to limit the current on the purple wire. If the fuse should trip, resetting
the fuse is a simple matter of turning off power for a few seconds. If additional
current is needed, you can use the purple wire to power a relay.
Trouble Shooting:
Radio doesn’t power up:
•
make sure the red wire is connected to +12V
•
make sure the black wire is connected to a good ground
•
Check for +12V on the purple wire when the ignition key is on
•
Check that the purple wire is connected to the correct “Switched power” input
wire on the radio
Radio shuts off immediately when key turned off:
•
Blue wire not connected to the correct wire to the door switch; It should show
0V with the door closed and +12V with the door open.
•
Red wire not connected to a co12V power source.
Radio doesn’t shut off when door opened
•
Blue wire not connected to the correct wire from the door switch; it should show
0V when the door is closed and +12V when the door is open
Warranty:
All Revolution Electronics products carry a warranty against defects in materials or workmanship
for a period of one (1) year from the original retail purchase. Revolution Electronics’ liability is
strictly limited to the prompt repair or replacement of the defective product. Revolution
Electronics shall not be responsible for (a) labor, transportation, or other incidental charges; (b)
consequential or other damages incurred by use of any product. Revolution Electronics offers no
other warranty beyond this limited warranty. This limited warranty does not apply to products
which have been (a) modified or altered in any way; (b) subjected to adverse conditions, misuse,
neglect, accident, improper installation or adjustment, contaminants, corrosion, or faulty repair; or
(c) used in applications other than those recommended by Revolution Electronics. To initiate a
warranty process, the consumer must first contact technical support
(
) to receive a return authorization number. The product must be
returned to Revolution Electronics complete with a dated receipt and a return authorization
number.
