4
4
4
4
Charging the Batteries
How to Charge
1. Place microphone(s) into the Executive Charger Base.
2. During charging, the LED indicator turns on (RED) and remains on until charging completes.
The microphones cannot be used while charging. The battery fully charges in approximately
two hours, and can be “quick-charged” to approximately 80% capacity in 45 minutes.
3. When charging completes, the LED turns off and microphone is ready for use.
Note:
A fully charged module battery provides approximately 8 hours of talk time.
When to Charge
First-time use — before you can use the wireless microphones, charge the self-contained battery
for two hours in the Charger Base.
Recharging—when the orange light starts to flash on the microphone the battery needs
recharging. Over time (years), batteries gradually wear down and require longer charging times.
This is normal.
The Lithium Polymer rechargeable batteries that power the microphones are not user
serviceable. Please contact your AV service provider for replacement instructions and to assure
the proper disposal method is used.
Warning: Never dispose of batteries in a fire because they may explode.
Using the Microphone
1. Remove the microphone from the Charger Base. The microphones turn on and mute
themselves automatically when removed from Charger Base, to reduce noise while being
attached to clothing.
2. The wireless microphone has a clip on the back which allows
the microphone to be easily clipped onto a shirt pocket,
blouse or lapel. The microphone can also be clipped on to a
lanyard and be worn around the neck. Attach the microphone
to clothing or to a lanyard, as close to the mouth as possible
(within 6 - 12 inches is recommended).
3. With the microphone in the wearing position, un-mute the
microphone by pressing and releasing the
MUTE
button
(confirm by viewing flashing GREEN LED).
4. To turn off microphones, return the microphone unit to the
Charger Base or press and hold the
MUTE
button for ~10
seconds until the LED turns solid RED and turns off.
5. If the microphones are moved out of range of the Base Station (~30 meters) the connection will
be dropped (LED flashes all colors) and the microphone will mute. When the microphone is
moved back into range the connection will automatically be re-established to its original state.
