38
Wireless NVR Kit Manual
The corresponding operation is explained below
：
Operation object
Function
Channel
Select the target channel which need to be set.
Protocol
The selection must be consistent with the PTZ protocol.
Device address
Enter the address of the specified decoder.
Baud rate
Select the baud rate which matching the connected PTZ.
Copy to
In the right selecting box of the
“
copy to
”
button, select the target channel,
click the "copy set to" button, the system will apply the current channel setup
information to other target video channel.
4.5.2 PTZ control operation
Steps：
1, In the main interface, double-click the preview interface which need to be set
2, Right-click in the preview interface and select PTZ control in the shortcut menu, as shown in the following figure
