Revo RETRT2812-2, Operating Manual

Page: 5 / 28

- 5 -
사 용 설 명 서
Installing & Adjusting
- Place the mounting plate on a flat installation surface
and mount with the provided screws.
- Feed the cable through the center of the mounting plate.
- Place the camera body in the mounting plate socket
and hold.
- Then place the outer plate over the camera body &
mounting plate and tighten side screws to lock the
camera into place.
- Loosen side screws to adjust camera angle as needed,
then tighten the side screws to lock into place.
- To widen the viewing angle turn the Zoom screw
to "W"(Wide) to obtain a closer view turn it to
"T"(Tele).
- Turn the Focus screw to "N"(Near) or "∞"(Far)
untill the sharpest Focus is made.
1. Installation
2. Focus / Zoom Screw
USER'S MANUAL