If the Camera Won't Trigger
• Make sure the plastic separator is removed
from the battery.
• Make sure the battery is installed with the
correct polarity.
• Set your camera for remote triggering.
• Make sure the camera and remote are
paired together, and you are within range.
• Make sure the lock switch is not engaged.
Pairing the Remote and Camera
Important:
See your camera’s manual for
instructions on setting your camera to remote
pairing mode.
Once your camera is ready to pair with the
remote, slide and hold the switch down to the
pairing position until confirmation appears
on the camera’s LCD. The remote’s indicator
LED will flash green during pairing.
Note:
If the remote is unused for a period of
time, the Bluetooth icon on the camera’s
screen may turn gray. Slide the remote to the
pairing position until confirmation appears
on the camera’s LCD.
