(17) USE OF GUIDE AND OTHER ATTACHMENTS:
BLIND HEMMING MACHINE (DCZ - 200)
Turning the Adjusting Screw clockwise. Guide Holder will come up to the left and depth
of the seaming line becomes smaller. To the Contrary, turning it anti-clockwise the
depth shall be bigger. Therefore, the adjusting must be made according to nature of
materials in use. Tighten Stopper Screw (C) after the adjusting.
adjusting.
It is preferable that the allowance between Hemming Guide (E) and Guide Holder will
have the space just for a sheet of fabric.
And, make the point of Hemming Guide (E) come to the halfway on thickness of the
Guide Holder.
Blind Hemming Guide is assembled on DCZ - 200 machines as the "Standard
Equipment".
Tightening Screw (B), Guide shall be fitted to Stitch Plate Supporter just
underneath of Cloth Plate (Upper) (A)
In the blind hemming, depth of seaming line can be adjusted turning Adjusting
Screw (D) after loosening of Stopper Screw (C).
To adjust width of the blind hemming, move the guide (viny1 made ) of
Hemming Guide (E) in right-left loosening the Screw (F)
D
C
A
B
E
F
17
