32
English
SD card will be deleted. The pictures stored on the Reviermanager
application will still be available and won´t be deleted.
8. Set date/time:
Date and time can be refreshed with this feature. (This
is helpful when the camera was has been without power or deactivated
for a long time).
9. Delete camera:
If a camera is not in use anymore or used by another
person the camera can be deleted from the Reviermanager app. By
doing this all pictures transferred from this camera will be deleted from
Reviermanager app gallery. Licenses are not affected by this and the
license terms stay unaffected.
10. Invite friends:
With the “Invite friends” feature more people with
different accounts can look at pictures of the same camera. Every friend
must be registered with his e-mail address beforehand. After this, every
single one can be invited. As soon as the invitation is accepted they can
switch to the gallery of said friend and look at the transferred pictures.
11. Gallery:
All transferred recordings (of all cameras) are displayed in the
gallery. You can use the filter button to restrict and sort the displayed
pictures (for example, only the photos of a certain camera). Zooming,
sharing, downloading and deleting of a picture can also be done here.
8. QUICK-CHECK
If your camera doesn‘t send pictures anymore even though you did point 5
„INITIAL START-UP OF THE CAMERA“ and point 6 „ACTIVATE YOUR APP
ACCOUNT“, please check these possible error sources:
1. Is your power supply working? Check the function again with a set of
new, full batteries.
2. Reset the camera to factory settings to delete the internal memory:
2.1. Switch the camera to SETUP
2.2. Press the MENU button and switch to the „SYS“ submenu
RM4_Bedienungsanleitung 06-2021_FSCneu.indd 32
RM4_Bedienungsanleitung 06-2021_FSCneu.indd 32
24.06.2021 13:24:01
24.06.2021 13:24:01
