21
20
Turning on the ReLog is a simple
task! Simply press the On/off but-
ton ( ) and the LED indicator will
show a steady green light, followed
by a steady blue light with battery
status indication every 3 seconds.
The ReLog is now in standby mode.
4. Using the ReLog
Measuring
Turn the ReLog on
Start measurements
To start measuring, press the Start/
stop button ( ) once. The LED
indicator will flash in blue 3 times.
The ReLog is now measuring.
During measurement, the LED indi-
cator flashes to indicate the battery
status every 3 seconds.
Stop measurements
To stop a measurement, simply
press the Start/stop button ( )
again. The LED indicator will once
again flash in blue 3 times, and
the ReLog will go back to standby
mode.
To turn the logger off, press and
hold the On/off button ( )
for 3 seconds when the logger is in
stand-by mode.
Below, you will find an instruction
on how to proceed to get started
with your measurements.
