background image

USER MANUAL

PAGE  3

REVEZ©2015

HD400MOD

1 - Safety considerations

1.1  CONNECTING TO THE MAINS SUPPLY 

This product has to be connected to the mains supply. If there is the slightest doubt concerning the 

type of connection available on the installation, please contact your supplier of electricity. Before car-

rying out maintenance operation or modification of the installation, the modulator has to be discon

-

nected. Remark : only use the supplied power adaptor.

1.2  OVERVOLTAGE 

An overvoltage on the mains supply,can cause shortcircuits or fire. Never overload the power lines. 

1.3 LIQUIDS 

This module should be protected from splashes. Please assure yourself that no containers containing 

liquids are placed on this module. Also be aware of other persons splashing liquids on the module.

1.4 CLEANING 

Disconnect the module before cleaning. Use only a humid cloth without solvant.

 

1.5 VENTILATION 

In order to assure an adequate air circulation and to prevent overheating, the ventilation holes should 

not be obstructed. The module may not be installed in a hermetically sealed environment. Other elec-

tronic products or heat producing items may not be placed upon or near the module. 

1.6 ACCESSORIES 

The use of accessories not manufactured by the manufacturer can cause damage to the module. 

1.7 INSTALLATION OF THE MODULE

The module must be installed in a place well protected from direct sunlight. All measures have to be 

taken to avoid installation in humid or sunny place.Do not install near heating elements or other devic-

es producing heat. Assure yourself that the module is placed at least 10 cm from other equipment with 

is susceptible to electromagnetic radiation. Do not install the module on instable items. A fall can cause 

physical or material damage.

Summary of Contents for HD400MOD













Reviews: