USER MANUAL
PAGE 10
REVEZ©2015
HD400MOD
5 - Programming using a PC
The settings of the HD400MOD can also be changed using a PC.
First, please install the software
TMHDIFace
on your PC. You can download this software from our
website
After installation of this software, connect the HD400MOD using a USB cable (not included) to your
personal computer. Then launch the program
TMHDIface.
On the display of the HD400MOD the message <USB> appears, indicating that the programming is
now performed through your PC. The following window appears on your screen.
Now, all parameters discussed in Chapter 4 of this user manual can be modified by TMHDIface.