6
Reverso Pumps, Inc.
1. Make sure that the system is in Manual mode.
2. Press down arrow 2 times.
3. Press ESC.
4. Select Setup, press OK.
5. Select Clock, press OK.
6. Select Set clock, press OK. Use up/down arrows to select the number and right/left to move across the
option. When done, press OK once.
7. Press ESC 3 times to go back to the main screen for manual mode.
Digital Control
Set Date and Time
1. Select this mode to run the system for a single preset time. Press the yellow button once to put system into
manual mode. The smart relay will be flashing amber.
2. Press and hold the yellow button for 3 seconds to start the pump for manual mode. Once solid, release the
button and the smart relay will turn solid amber while the indicator light will turn blue. This indicates that the
pump is running.
3. Pump will automatically shut off after the preset run time is over. User will need to put system back into
automatic mode if desired.
4. If manual mode must be stopped while the system is running, press the red button Stop/Reset.
Manual Mode Operation
1. Press yellow button to go to manual mode. Amber color will be flashing.
2. Press down arrow to see the manual time set.
3. Press and hold ESC. Use arrow to change unit of time in minutes or hours. Press OK and change the
desired time to run the system. When done, press ESC.
4. Press up arrow to go back to the principal screen.
5. Keep press yellow button to start the pump running the system with the set time. Pump will
automatically shut off after the preset run time is over.
6. If the time must be reduced or increased while the system is running, repeat the steps to change the
time for manual mode.
Set Manual Timer
Automatic Mode Operation
Modbus
Set Automatic Timer - Press green button to enter Automatic Mode
The system will start/stop automatically on the programmed days of the week and times. To set up the frequency
take into consideration the size of the tank and the environmental conditions. When the Automatic Timer is
selected, the pump will only begin running if within programmed date/time to run.
For an initial cleaning, we recommend the tank to be cycled 3 times. Once in Automatic mode, the cleaning can
be performed once a week.
For information about modbus, contact Reverso Pumps, Inc.
Recommended Run Cycle =
(Manual Mode)
Volume of the tank x 3
Flow Rate of the System
1. Press up/down arrow to view the days of the week.
2. Press ESC and hold for 3 seconds to set the dates and times for the selected day.
3. Use up/down arrow to go to ON time and OFF time. Press OK.
4. Change the hour using the left/right arrows to move the position on time, and use
up/down arrows to change the number.
5. Press ESC twice to return to days of the week screen.
6. Repeat for every day that is schedule to run the system.
7. Press and hold green button for 3 seconds to start running the program.
