HEAD AND FOOT MASSAGE
CONTROLS (J,M)
Turns on the corresponding massage
unit and slowly increases or decreases
massage intensity.
WAVE MASSAGE PATTERN (K)
Turns on both head and foot massage
motors to 4 different wave presets.
MASSAGE STOP (L)
Press to stop all massage features.
CHARGING PORT (N)
To charge remote, plug in the wall
charger and connect to the micro
usb port. Unplug and plug-in the
remote again if you do not see a
charging symbol on the screen.
A flashing LED on the remote
indicates low power status.
NOTE: Any control button on the
remote will interrupt and stop the
FLAT, ZERO-G, Anti-Snore and
Memory Position presets.
NOTE: The lowest setting will turn
off the corresponding massage unit.
NOTE: The massage feature is
designed to automatically shut off
after 30 minutes of continuous use.
NOTE:
Do not hold the memory
position for more than 5 seconds
or the setting will overwrite.
HEAD AND FOOT
ADJUSTMENTS (A,C)
Adjusts the head and foot sections
to the desired positions.
LUMBAR, TILT, OR PILLOW (B)
Your base includes 1 of 3 features;
Lumbar, Tilt, Pillow Tilt, or no
feature. Lumbar adjusts the lumbar
support on your bed. Tilt slightly
tilts your bed forward or backward.
Pillow tilt adjusts the pillow section
of your bed.
FLAT (F)
Returns both head and foot to the
flat position.
NIGHTLIGHT ON/OFF (H)
Toggle the lightbulb button for on/off
functions. The Nightlight button also
functions as the pairing button.
PROGRAMMABLE MEMORY
POSITIONS (G,I)
You can store 2 personalized
memory positions. Press and hold
the Memory button for 5 seconds
until the LED light flashes 3 times to
store the setting. To recall a Memory
Position, press the corresponding
button.
ZERO GRAVITY (E)
Allows your legs to be lifted to a
position slightly above the chest,
which enables blood flow to easily
circulate back to the heart, thus
reducing stress and fatigue.
ANTI SNORE (D)
Raises the HEAD slightly for easier
breathing.
A. RAISE & LOWER HEAD SECTION
C. RAISE & LOWER FOOT SECTION
B. VARIABLE THIRD FEATURE
D. ANTI - SNORE
E. ZERO GRAVITY
F. FLAT
G. MEMORY POSITION 1
H. NIGHTLIGHT ON/OFF
(REMOTE PAIRING)
I. MEMORY POSITION 2
J. HEAD MASSAGE INTENSITY
K. WAVE MASSAGE PATTERN
M. FOOT MASSAGE INTENSITY
L. STOP MASSAGE
N. MICRO USB CHARGING PORT
DISPLAY SCREEN
Remote Control Operation Guide
NOTE:
If the remote cannot
detect any beds, then it will
display NO BED FOUND.
NOTE:
Screen will timeout after
5 seconds, 15 seconds if screen
is auto-refreshing.