REVENTON S1-3S, Technical Documentation Manual

Page: 6 / 16

- i t is recommended to clean the device periodically (at least twice a year):
ź
heating coil blow with compressed air
ź
fan casing and blades clean from dirt
- failure to comply with cleaning obligations may have a negative effect
on technical parameters of the device
and lead to loss of warranty
- i f the device is not used for a longer time disconnect the power supply
- the device is transported with the closed air stators. It is essential to open
them in at least for 30 % before first start
- opening the air stators must be done by two hands in parallel
6. CONTROLS
Usage of automatic control dedicated to the air water heaters of Reventon
Group gives great possibilities of adjusting the efficiency of the heater
in different, depending on needs, degree of its operation automation.
We can offer the following:
is used to regulate devices equipped with 3-stage fans. It has a 3-stage speed
control and built-in thermostat switches the device of automatically
when the preset temperature is reached. In addition, the unit controls
the operation of the actuators installed on the control valve
.
Voltage/ Frequency: 230 V AC / 50 – 60 Hz
Maximum current output: 3 A
Temperature range: 10°C - 30°C
Operating mode : continious or thermostatic
Control accuracy: <1°C
Dimensions: 130 x 85 x 40 mm
Weight: 210 g
Degree of casing's protection: IP 30
is used to regulate devices equipped with 3-stage fans. It is an advanced
controller with many functions i. a. operation in heating, cooling or mixed mode,
programmable mode, valve control, automatic selection of the fan speed.
Together with the controller an external sensor is provided, which allows to read
the temperature in the required place, even remote from the controller.
In addition, the device can be integrated with the BMS building control system
(using the MODBUS communication protocol).
Voltage/ Frequency: 230 V AC / 50 – 60 Hz
Maximum current: 5 A
Operating temperature range: 0 - 45°C
Regulation range: 5°C - 35°C
Regulation accuracy: ± 0.5°C
External temperature sensor: NTC 10K
Communication: RS485
Dimensions: 86 x 86 x 13.3 mm
Weight: 270 g
Degree of protection (housing): IP 20
Degree of protection (external sensor): IP 68
Programmable controller HMI
3-stage speed controller with thermostat HC-3S
Fan speed controller HC
Two-way valve with actuator ¾”
Manual thermostat HC
designed to change the single-phase fan's speed voltage controlled in industrial
supply and heating systems. It is available in several versions. The selection
of the appropriate model depends on the number of the devices
that have to be connected to the to one regulator – the total intensity
of the connected devices cannot exceed the maximum current flow
of the regulator.
5 control levels: 80-105-135-170-230 V*
Voltage/ Frequency: 230 V AC / 50 – 60 Hz
Maximum current output (depending on model):
1.2 A, 3 A, 5 A, 7 A, 14 A
Protection: thermal switch
Weight(depending on model):
1.45 kg, 2.5 kg, 4.5 kg, 5.5 kg or 10.5 kg
Degree of protection: IP 54
* regulation for 3 A regulator: 70-85-105-145-230 V
is used to automatically regulate the flow of the heating medium.
Voltage / Frequency: 230 V AC / 50 – 60 Hz
Power consumption: 2 VA
Kvs coefficient: 6.3 m³/h
Stroke: 3 mm
Operating condition of actuator: -5ºC - 60ºC
Running time: 3 - 5 min
Degree of protection: IP 54
is used to automatically regulate the flow of the heating medium.
Power supply/ Frequency: 230 V AC/ 50 – 60 Hz
Power consumption: 7 VA
Kvs coefficient: 6 . 5 m³/h
Operating condition of actuator: 0 - 60ºC
Running time (motor): 18 s
Running time (return spring): 5 s
Degree of protection: IP 20
allows to connect a receiver with higher current consumption than permissible
current load of connected regulator.
Power supply/ Frequency : 230 V AC / 50 – 60 Hz
Maximum rated current: 16 A
Input : NO/COM
Input : SL Connection of a regulator
with the voltage relay 230 V
Dimension : 47 x 47 x 20 mm
c ontrols operation of the heater. Switches the unit off automatically
when the set temperature is reached.
Power supply/ Frequency : 230 V AC / 50 – 60 Hz
Maximum rated current : 3 A
Operating temperature: 0 - 40°C
Temperature control range: 10 - 30°C
Control accuracy: <1°C
Degree of casing's protection: IP 30
Three-way valve with actuator HC 3/4"
Relay Module RM-16A