REVENTON INSPIRO, Technical Documentation Manual

Page: 7 / 13

is supplied with 5 m cable, which can be extended if necessary.
6.4 INTELIGENTNY PANEL STERUJĄCY STANDARD
The STANDARD control panel has a liquid crystal LCD screen. The controller
LCD display
Buttons
in the ON state is indicated by the operating diode.
- MODE - press this button to display status of OA / RA / SA / FR mode (outside air,
return air , supply air and exhaust air ).
- FAN - press this button to adjust the fan speed. Depending on the mode,
is changed. It is possible to set 10 different speeds for each fan.
the speed of the supply air fan (in OA or SA mode) or exhaust fan (in RA mode)
- POWER ON / OFF – press this button to turn the device on / off. Work
In order to confirm the set time press SET button and to exit without saving
Controlling
Clock settings – press CLOCK button and when the colon of the clock stops
flashing, press the button again. Then set the time using RIGHT and LEFT arrows
and press CLOCK one more time to set the minutes in a similar way.
Day settings - press DAY button and when the day symbol starts to flash, select
the desired day with RIGHT and LEFT arrows. In order to confirm the set day
press SET button and to exit without saving the entered data press the EXIT
button
.
Schedule – weekly schedule allows you to define periods (two per day)
the entered data press EXIT button.
in which the unit will work. It is realised by functions weekly timer
on to determine beginnings of these periods) and weekly timer off (to determine
ends of these periods):
and LEFT buttons to select day.
The numbers '1' and '2' indicate the end of the first and second schedule period.
ź
Weekly timer on - press WEEKLY TIMER ON button - all days of the week
The user can select a period of time by pressing MODE button.
of the period for a given day is not set. In order to confirm the set time press SET
button and to exit without saving the entered data press EXIT button.
that the end time of the period for a given day is not set. In order to confirm
the set time press SET button and to exit without saving the entered data press
EXIT button.
ź
Weekly timer off - press WEEKLY TIMER OFF button - all days of the week
will display. Then use DAY button to select a specific day of the week. Subsequent
presses WEEKLY TIMER OFF will switch between: hour -> minute ->
deactivation the schedule. The appearance of the symbol "-: -" means
In order to check the existing schedule, press DAY button and use RIGHT
Error code – press SET buton to display the error code.
will display. Then use DAY button to select a specific day of the week. Subsequent
presses WEEKLY TIMER ON will switch between: hour -> minute -> deactivation
the schedule. The appearance of the symbol "-: -" means that the start time
The numbers '1' and '2' indicate the beginning of the first and second schedule
period. The user can select a period of time by pressing MODE button.
Kod
E1
E2
E3
E4
E5
E6
E7
E8
Error
fresh air temperature sensor (OA) error
EEPROM memory error
return air temperature sensor (RA) error
exhaust air temperature sensor (FR) error
communication error
supply air temperature sensor (SA) error
exhaust fan error
supply fan error