REVENTON HUMMER 150C-1P, Technical Documentation Manual

Page: 2 / 10

1.INTRODUCTION
1.1 PRECAUTIONS
1.2 TRANSPORT
1.3 PACKAGE CONTENT
1.4 USE
2.DEVICE CHARCTERISTICS
2.1 DIMENSIONS
2.2 TECHNICAL DATA
3. INSTALLATION
3.1 GENERAL PRINCIPLES
3.2 MOUNTING ELEMENTS
3.3 OUTLET GRILLE
4. INSTALLATION INSTRUCTIONS
4.1 CONNECTION OF THE DEVICE TO THE HYDAULIC SYSTEM
4.2 CONNECTION OF THE DEIVCE TO THE ELECTRICAL SYSTEM
5. PRECAUTIONS AND WARNINGS
6. CONTROLS
7.CONNECTION SCHEMES
8.TERMS OF WARRANTY
1. INTRODUCTION
Thank you for purchasing air curtain HUMMER. We would like to congratulate
on good choice. Please read and save these instructions.
1.1 PRECAUTIONS
The buyer and the user of the device should read carefully the following
instructions and proceed to the content recommendations. Proceeding
due to the following instruction guarantees the correct usage and safety. In case
of any doubts please contact Reventon Group sp. z o. o. [Ltd.]. The producer
reserves the rights to make changes to the technical documentation without
previous notice. Reventon Group sp. z o. o. [Ltd.] is not responsible
for the damages which occur
due to improper installation, not keeping the device
in repair or using the device out of line. The installation should be carried
out by the professional installers, who possess the qualifications to install these
types of devices. The installers are responsible for making the installation
as instructed in the technical data. Regulations and safety rules
must be followed.During the installation, use, service and periodical inspections
all regulations and safety rules must be followed. In case of unserviceable please
plug out the device and contact with the authorized person or the
s upplier.
All safety requirements must be taken into account during installation,
use or inspection.
1.2 TRANSPORT
During the acceptance of goods it is needed to check the device in order
to exclude any damages. During the transport it is needed to use the proper
equipment, it is necessary to carry the device by two people. In case
of any damages please fill in the damage report in presence of the
s upplier
or the carrier.
1.3 PACKAGE CONTENT
- air curtain
- operation and maintenance manual and warranty card
- mounting elements ( 10 pcs.)
1.4 USE
Industrial curtains HUMMER series are available in two version - with a water
heat exchanger (devices with
'W' symbol) or without it (unheated air curtains
are marked with the letter ' C ' ) Regardless of the version, the curtain function
is to protect the room against heat, cold, dust and insects from the outside.
In winter they prevent uncontrolled heat loss and in summer they prevent heat
from the room. The curtains with heat exchanger additionally heat up circulating
through them air. They are characterized by a large stream and the range
of the blown air. For this reason, they are an ideal solution for industrial gate
of warehouses, production halls, workshops, garages etc. The devices should
not be used in corrosive environments for aluminum, copper and steel as well
as heavily dusted (above 0.3 g/m³) .The curtains should also not be installed
in rooms where they would be exposed to high humidity or direct contact
with water.
TECHNICAL DOCUMENTATION
ENG
2. DEVICE CHARCTERISTICS
2.1 DIMENSIONS
HUMMER 150C-1P and HUMMER 150W-1P
HUMMER 200C-1P and HUMMER 200W-1P
Nominal heating capacity [kW]*
2.2 TECHNICAL DATA
n/a not applicable
* for parameters 90/70°C and 0°C inlet
** measurement at the distance 5 m
Maximum airflow [m³/h]
Maximum range [m]
Rated motor current [A]
Motor power [W]
Protection degree IP [-]
Net weight [kg]
Noise [dB]**
ACH150C-1999
HUMMER 150C-1P
ACH200C-2000
HUMMER 200C-1P
ACH150W-2001
HUMMER 150W-1P
Maximum temperature of
working fluid
[°C]
Connection diameter [``]
Supply voltage [V] /
Supply frequency [Hz]
n/a
7200
6.5
n/a
n/a
n/a
230/50
2 x 1.08
2 x 240
54
40 57 51 70
67
n/a
10500
7.0
n/a
n/a
n/a
230/50
3 x 1.08
3 x 240
54
70
27.9
6500
6.5
120
1,6
3/4
230/50
2 x 1.08
2 x 240
54
66
34.0
8500
7.0
120
1,6
3/4
230/50
3 x 1.08
3 x 240
54
69
ACH200W-2002
HUMMER 200W-1P
TECHNICAL DATA
Product code
Maximum working pressure
[MPa]