-
don’t allow water or any liquid to enter the motor
-
maintenance and repair work must be carried out by a qualified personnel
familiar with local regulations and standards
-
always unplug or disconnect the appliance from the power supply before
installation, servicing or cleaning the unit
-
never use petrol, benzene, thinners or any other chemicals for cleaning the unit
-
periodic maintenance work should be carried out at least once a year by:
ź
cleaning of plastic parts with water with the addition of soap
ź
cleaning the casing with a soft cloth
- failure to comply with cleaning obligations may have a negative effect
on technical parameters of the device
and lead to loss of warranty
-
if the device is not used for a longer time disconnect the voltage supply
-
if any abnormality happens, turn off the product immediately and check
the problem
6.
CONTROL
The curtain can be controlled by the remote controller or control panel, located
on the housing with three buttons ON/OFF, L and H:
- ON/OFF button allows to turn on / off the device
- L button enables to choose I motor stage (low speed)
- H button is used to switch the motor speed to high one (II stage)
NOTES
- the curtain make a sound 'beep' everytime when you press any buttom
(signaling the command acceptance)
7.
CONNECTION SCHEMES
LEGEND
:
1. Electric socket
2. Plug
3. Unheated air curtain
AERIS C-1P
4. Door switch
blue blue
