Figure 12. How to connect
multiple REVEL PERFORMA
B15 subwoofers.
REVEL PERFORMA B15 SUBWOOFERS IN
MULTIPLE OPERATION
Multiple REVEL PERFORMA B15 subwoofers (using their own
crossovers) can be connected in a “daisy-chain” with a multi-channel
controller and power amplifier, as shown in Figure 12. If all sub-
woofers are placed next to each other or in symmetrical room loca-
tions, set all level and phase controls for the same respective values.
REVEL PERFORMA B15
Owner’s Manual
19
#1 B15 Rear Panel
(split view)
#2 B15 Rear Panel
(split view)
Main Amplifier
(rear)
To Main Speakers
Left Input
Left
Right
Right Input
Multi-Channel Controller (Decoder)
(rear)
Left Output
FRONT/MAIN
Right Output
Left Output
REAR
Right Output
Left Output
SURROUND/SIDE
Right Output
CENTER Output
SUB/LFE Output
NOTE: Set Controller outputs to full-range L/R Front and no SUB.
If applicable, set all other channels to pass 80 Hz and above.
Below 80 Hz, signals will route to the B15s. Alternately, if Controller’s
crossover is used (i.e., SUB/LFE Output) set Low Pass Filter to
OFF on all B15s.
or
or
or
or
RCA cables
to #2 B15
INPUT
or
RCA cables
to #3 B15
INPUT
(Optional)
XLR cables
to #3 B15
INPUT
or
RCA cables
to #1 B15
AUX OUTPUT
or
