Reveal ZERO ZONE, Installation & Operation Manual, Page: 17 / 25

Installation & Operation • 15
INSTALLATION & OPERATION
Night Curtains
Cases ordered with night curtains will have factory-installed mounting brackets. A retrofit kit must be ordered from Zero Zone to install onto a
case that was not ordered with night curtains.
Some night curtains pull down and lock into position like roller window blinds. Other night curtains use a magnet and attach to the metal
kickplate. If the night curtain has a magnet, orientate the night curtain so the magnet can attach to the case.
Tip the night curtain forward into the mounting bracket and twist it until you hear a click as the brackets engage ( See Figure 25 ). Once installed,
the night curtain can be pulled down ( See Figure 26 ).
Under Shelf Lights
1. position the under shelf light on the bottom of the shelf with the wire connector towards the left side of the shelf ( See Figure 27 ).
2. Attach the under shelf light to the shelf using the two magnets that are factory-installed to the light stick.
3. After installing the shelf, plug the wire into the nearest duct pocket under the shelf ( See Figure 28 ).
4. Bundle harness wire and place into magnetic clip. Mount magnetic clip on the side of the shelf bracket.
FIGURE 25: Install Night Curtain into the Brackets FIGURE 26: Night Curtain Pulled Down
FIGURE 27: Install Light Under the Shelf FIGURE 28: Plug Into the Duct Pocket