15
CASE STARTUP / HEATER SETTINGS / LIGHTS SWITCH / SHUTTING DOWN CASE
1. Main Power Switch
Control panel (at case rear) is accessible after
removal of lower-rear panel.
Turn main power switch “ON” to energize case.
2. Heating Up Case / Adjusting Settings
Note: Cases are designed to MAINTAIN product
temperatures – NOT heat up product! Do not place
product that is cold or ambient temperature in case.
Before placing pre-heated food in case, allow
1 1/2 hours (90-minutes) for case to achieve its
desired temperature.
If adjusting heater settings, allow 20 minutes at
new settings for temperature to affect product.
3. Light Switch
Control panel (at case rear) is accessible after
removal of lower-rear panel.
Turn lights switch “ON” to turn on lights.
All LED lights will come on at the same time.
4. Shutting Down Case
Remove all product from case.
Turn main power switch to “OFF” position.
Caution! Deck and shelving are hot. Allow case
to cool for 45 minutes before cleaning.
Note: When main power is turned back on, you do
NOT need to re-enter settings. Temperatures will
revert back to your LATEST SETTINGS before
shutdown.
Programmable
Controllers*
Model NE4835HSSV Slide-In Unit
(Shown) May Not Exactly Reflect
Every Feature or Option of
Your Particular Case.
Lights
Switch
Main Power
Switch
*Note: Only taller units have upper and lower heaters (with two programmable controllers). All others have only ONE
heater (with ONE programmable controller).
> If “HUMIDITY” etching is on faceplate, simply ignore; such markings are not applicable to cases in user manual.
