13
OPeRATION
Position your hand anywhere in front of the control panel to activate the DMV. Water
is delivered at a default temperature, refer to
SPeCIFICATIONS
.
Note!
The sensors are designed to operate at a distance of up to 30 mm. There is
no need for the user to touch the control panel.
Position your hand over the Down arrow to obtain a cooler mix. When only the blue
light is illuminated on the control panel, then only cold water is being supplied. If the
blue light is flashing, then the minimum preset temperature is being delivered.
Position your hand over the Up arrow to obtain a hotter mix.
Note!
Adjusting the temperature automatically resets the flowtime.
The water should flow until either it is switched off manually (by positioning your
hand over the central logo, ‘Flow sensor’) or the programmed flow time duration
has elapsed.
Programming window
Flow sensor
Down arrow
Up arrow
LED’s indicating
temperature selection
Duty Flush
The DMV incorporates an option for duty flush which can be selected with the aid of
a Programmer. If duty flush is selected and the DMV is not used for a period of time
(pre-set waiting period) the standing water within the DMV will be flushed out.
Duty flush temperature, waiting period and flush period are preset at the factory.
These settings can be reset, refer to your Rada Sense Programmer Software
Manual.
Disinfection
The DMV incorporates an option for disinfection which can be selected with the
aid of a Programmer. The default disinfection settings can be reset, refer to your
Rada Sense Programmer Software Manual.