DIRECTIONS FOR USE
BATH FILL
Pass your hand in front of the sensor touch to start filling
of the tub.
The filling stops automatically when the water reaches
the stainless steel support rail.
It is possible at any time to stop the filling by passing
your hand in front of the sensor.
CLEANING SHOWER HANDSET
Check, water temperature, before each use.
Pass your hand in front of the sensor touch to feed the
hand shower.
The hand shower is equipped with a trigger.
For security reasons the water feeding will be cut off
automatically after 5 minutes of operation.
It is possible at any time to stop or restart the power of the
hand shower by passing your hand in front of the sensor.
It is possible to adjust the pressure of the hand shower by closing or opening slightly the ¼ turn valve located at the end of
the hose.
DISINFECTION SHOWER HANDSET
The disinfection shower is identified thanks to a red label "disinfection shower" and a
yellow flexible.
The disinfection shower allows the disinfection of the bathtub after each use and is
connected to a disinfectant tank (see: disinfection system). The disinfectant product is
sucked automatically pressing on the pawl.
The disinfection shower is fed with cold water for a better effectiveness of the disinfectant
product.
A ¼ turn valve regulates the flow rate and cuts off the supply of the hand shower.
After using the shower, do not forget to turn off the 1/4 turn stopcock.
(a shower under pressure being much more fragile).
Do not use the disinfection shower on the patient.
Wait in order to respect the action time prescribed in accordance with the disinfectant used.
15 minutes for the BFR4.0 disinfectant
Rinse the tub with the cleaning shower after disinfection.
8/16
