REV Midwest Automotive Design American Coach Patriot 2022, Owner'S Manual

Page: 117 / 178

A M E R I C A N C O A C H P A T R I O T O W N E R ’ S M A N U A L
A M E R I C A N C O A C H // P A T R I O T S E C T I O N 1 0 // 1 1 5
Additional-Resources.aspx#Manual
To operate your True Induction
®
Cooktop, please refer to the
image above, and follow these step-by-step procedures:
STEP 1
If your cooktop is recessed into the countertop, carefully
remove the cover and store it in a cabinet where it will not
be damaged;
STEP 2
Provide 120-Volt AC power to the unit� If you are not
connected to shore power and are operating off the
optional generator or the house battery bank, set the
inverter to “On” at the main Firefly network interface
display� Please refer to the INVERTER chapter of
SECTION 9 – ELECTRICAL SYSTEMS�
STEP 3
Turn power on by pressing the “ON/OFF” touch key once�
The power light indicators will turn red and the unit will
start heating if a proper ferromagnetic pot or pan is
being used;
STEP 3
Set the temperature. There are two heat setting options;
Quick touch level selection (setting 1 through 10); and,
exact temperature settings (150 °F - 450 °F);
STEP 4
To set the quick touch level heat setting, press the “+ / -“
touch key, until the desired heat level is achieved� The
default is set to level 5;
STEP 5
To select a specific temperature setting, press the “temp”
touch key and watch for the temperature light to turn
red� Then press the + / - touch key until the desired
temperature level is achieved� The default setting is
270°F; and,
STEP 6
After cooking is completed, press the “ON/OFF” touch key
again to turn the unit off�
To use the timer function follow these steps:
STEP 1
Press the “Timer” touch key, it will default to ‘0’ on
the display;
STEP 2
Press the “UP or DOWN” touch key repeatedly to set the
cooking time� The time can be set in 5-minute increments
up to a maximum of 150 minutes� Once set, the timer
counts down in 1-minute intervals
STEP 3
A beep will sound when the cooking time has finished,
and the cooktop will switch over to standby mode� After
cooking is completed, press the “ON/OFF” touch key to
turn the unit off�
To ensure the cooktop is operating effectively be sure to follow
these easy maintenance and cleaning procedures:
STEP 1
Before cleaning make sure the cooktop is off and the
surface is completely cool;
STEP 2
Using a damp lint free microfiber towel with some
dishwashing liquid, wipe the entire surface of the unit
clean. Rinse the towel and wipe away any soap residue;
STEP 3
For stubborn or burnt on food residues, dampen the
surface and use a plastic razor blade to scrape away any
residue. (Use a plastic blade);
STEP 4
Dry the cooktop surface with a soft clean towel, being
careful not to scratch the finish;