11
GB
4. Disconnect the connecting cable and connect it to the terminal (Fig. 7).
L= phase (brown)
N= Neutral (Blue)
5. Now screw the cover (b) back onto the luminaire connection side and then the cover (b) to fix the
connection cable (Fig. 7).
6. Press the luminaire onto the mounted mounting plate until it audibly clicks into place (Fig. 8).
7. Switch on the fuse again (Fig. 9)
Cleaning
• Disconnect the luminaire from the power supply and secure the circuit against being switched on
again. Allow the luminaire to cool down sufficiently!
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not
use cleaners that contain abrasives or solvents.
Maintenance
• Replace damaged protective panels immediately.
• Remove all dirt from the housing or the protective panel immediately, as this can lead to
overheating.
• The light source of this luminaire is not replaceable, if the light source needs to be replaced
(e.g. at the end of its life), the complete luminaire must be replaced.
WEEE-reference of disposal
In accordance with European defaults used electrical and electronics devices may no
more be given to the unsorted waste. The symbol of the waste bin on wheels refers to the
necessity of separate collection. Please help with environmental protection and see to it
that this device is given to the for this purpose designated systems of waste sorting if you
do not use it any longer. DIRECTIVE 2012/19/EU of the EUROPEAN PARLIAMENT AND OF
the COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE).
ANL_LG06P-06-10_LG06P-06-18_LG06P-12-18_LG06P-12-36L_LG06P-15-24_LG06P-15-45L.indd 11
14.05.2019 15:39:31
