Rev-A-Shelf 5PD Series, Installation Instructions Manual, Page: 3 / 8

3
INSTALLATION INSTRUCTIONS:
5PD SERIES PULL DOWN
Attach the two wire baskets
to the side frames using (8)
M4 x 6 mm pan head machine
screws ( Figure 3 ).
Attach the handle to the side
frames using (2) M5 x 12 mm
pan head machine screws as
shown in ( Figure 4 ).
Note: Screws may already
be attached to brackets
and handle.
STEP 3
Mount this assembly to the
base brackets and use (4)
M4 x 6 mm pan head screws
to secure the unit to the
brackets ( Figure 5) .
Attach the two cover plates
to the side frames to cover
the screws installed in Fig 5 .
STEP 4
Assembly
FIG.
3
FIG.
5
FIG.
4
#2
#2