Operation instruction MagicBox
Seite
6
von 21
4.1.2 Fasten the blind plug / electrolyte supply hose
⚫
Insert the blind plug / electrolyte supply hose in the plug
connection to the bottom.
⚫
Check whether it is firmly seated by pulling it lightly.
4.2 Monitoring electrolyte level
The sensor for monitoring the electrolyte level is attached to the base
plate.
⚫
When the level is low:
➢
the level indicator turns on with a warning tone
Note
Replace the empty canister with a full one and pour
the rest into the new one.
4.3 Manuel supply of electrolyte
⚫
Hold down the push button
➢
The pump runs and supplies electrolyte
⚫
Release the push button
➢
The pump stops supplying electrolyte
Note
This function is only required to empty or fill the hose manually.
Supply only enough electrolyte until the brush is moistened!
Level sensor
Electrolyte level
Level sensor
