21
/
33
Projector connected to composite video source equipment
1) Connect one end to the output socket of the composite video source using a composite
video cable (which is not wrapped in the projector)
2) Connect the other end of the composite video cable to the composite video input port of the
projector
Booting up projector
1) Plug the power cord into the projector and wall outlet. Turn on the wall socket switch (if
any), check the power led on the projector for a red light
2) Press the projector or the power button on the remote control to start the projector. After
the projector is turned on, the indicator light illuminated steady green. If necessary, rotate the
focusing ring to adjust the image sharpness
3) Then, the projector began to search the input signal, you can also press the projector or
remote control signal Source button to select the desired input signal.
5.
Setting
5.1.
Using menu
Below is the system level menu, divided into 5 categories: images, display, Settings, options
and information. The cursor can move between these 5 items and supports automatic preview
of submenu.
Image menu
Function
Specification(AV)
Image mode
Standard/Bright/Picture/Film/User
Brightness
0~100
