17
/
33
1920*1080
P
100
2214*1245
210±30
330±40
495±30
120
2657*1494
315±30
375±40
595±30
150
3321*1868
445±30
475±40
730±30
1920*720
150
3500*1300
460±30
500±40
780±30
Note: The height of the projection is for reference only
Warning
1) Installation to wall or ceiling need special method, if installation not correct, maybe fallen
down and cause an accident or injure.
2) If the anchor is attached to the wall fixing point or the ceiling hanger fixing point to prevent
the screw from loosening, or the projector is lubricated with oil or other oil, the projector case
may be broken, causing the projector to fall. This may cause serious injury to the person
standing under the pylon and the projector may be damaged. Please do not use adhesive to
prevent the screws from loosening or use lubricating oil or other oils when installing or
adjusting the hanger.
3) Do not cover the inlet or exhaust port of the projector. If one of the vents is covered, it may
cause the internal temperature to rise and the projector may turn off.
Please contact professional staff for installation for the ceiling.
1) Please be sure to use correct tools to install them when projectors are hung on walls or
ceilings.
2) The preset projection mode is set to the front of the desktop and you can change the other
projection form via the menu option: menu - setting - installation method (the ceiling backdrop
/ ceiling front / desktop backdrop / desktop precast)
3.10.
Device connection
When connect signal to projector, please confirm below:
1) Power off before connecting any device.
2) Choose correct cable for each signal source
3) Make sure the power supply inserted solidly
Notes:
In the connection shown below, part of the cable may not be included in the packaging of this
projector (please check the package overview). You can buy the cable if you need at the
electrical store.
