GB
GB
INDICE
36
5. EXPERT SETTING
lncrease the temperature measured by the ambient temperature sensor by 2°C
by pressing
.
In our example the measured temperature by the sensor goes
from 21°C to 23°C.
5.4 RESTORING FACTORY SETTINGS
lf the PIN code protection is disabled, the user, installer and expert settings
are re-initialized:
1- From the Power setting setting, presse
OK
rest appears on the display.
play
To validate, save the newvalue and exit the mode, press
OK
.
To exit the Expert settings, press
mode
3 times.
• The resetto zero ofthe sensor calibration
To put the value of the correction to “O”, do the following:
1- When the temperature measured bythe sensor appears, press
or
for at least 3 seconds
2 - To save and move automatically to the next setting press
OK
.
To exit the Expert settings, press
mode
3 times.
lmportant:
These changes should be performed by a qualified staff,
it should be performed in production or on site during the first instal-
lation.
5.3 SETTING THE POWER
To have a thermostat suitable for the towel warmer and to estimate the energy
consumed, it is essential to configure the strength of the heating element com-
bined with the towel warmer.
1- Pre set value: 500W. Select a value between 500W and 1500W by
pressing
or
.
2- To save and move automatically to the next setting press
OK
.
3 - To exit the Expert settings, press
mode
3 times.
2 -
NO
flashes. Press
or
to select
YES.
YES
= Factory setting reset
NO
= Factory setting not reset
3 - Press the key
OK
for 5 seconds. The device returns to its initial
confi guration and goes back automatically to the Auto mode.
SETTINGS
FACTORY SETTINGS
OPERATING
Comfort setting temperature
19°C
Boost duration
60 min.
Keypad lock
Disabled
USER SETTING
Eco mode temperature lowering-level
-3,5 °C
Frost protection temperature
7°C
Minimum set of Comfort setting temperature
7°C
Maximum ambient temperature for
the automatic stop of the Boost
39°C
Temperature unit
°C
installer settings
Automatic detection of open window
Enabled
PIN code protection
Disabled
Value of the PIN code
0000
Expert installer settings
Power
500 W
The following factory values will be effective:
