Retsch ZM 300, Manual

Page: 37 / 93

Operating the device
37
Fig. 19: Overview of grinding tools and cassette
Fig. 20: Interior with rotor shaft
4. Place the labyrinth disc (27) around the
rotor shaft (11) ( Fig. 20).
5. Ensure that the anti-rotation device is
correctly engaged ( Fig. 20 ).
6. Place the cassette (26) (without lid) on the
labyrinth disc (27).
7. Ensure that the anti-rotation device is
correctly engaged.
Fig. 21: Ring sieve and rotor
8. Place the rotor (25) around the rotor shaft
(11) over the labyrinth disc (27).
9. Ensure that the driver is correctly engaged
on the rotor shaft (11).
10. Place the ring sieve (24) in the cassette
(26) with the rotor (25) in place ( Fig. 21).
NOTICE : Do not start the device without
the ring sieve in place. The lid tension could
be too high, which would cause the rotor to
drag on the lid!
11. Ensure that the anti-rotation device is
correctly engaged ( Fig. 21 ).
27
11
27
26
25
24
23
24
25
27
10
2