21.11.2001
Retsch GmbH
15
Doc. No E98.014-016.9999 A
Operation for the AS200 control
Switching on and off
The main switch
J
is located at the left-front on the
AS200; see
Fig. 1
.
* Turn the main switch on.
* An
amplitude
value of 1.50 will be shown
in the
display,
see
Fig. 2
.
* The
interval
off LED will light; see
Fig. 2
.
* Two bars will appear in the
time
display; see
Fig. 2
.
Fig. 1
The
AS200 is now ready for operation, without the intermittent
operation function, in continuous duty, at vibration height of 1.5
mm.
Start - Interrupt - Stop
Fig. 2
Start: Fig. 2
* Press the START button
W
.
* The green LED above button
W
lights.
* Display
L
shows the run-up to the predetermined value.
During the sieving period the vibration height will be kept
constant, within the predetermined tolerances.
Interruption (pause function): Fig. 2
* Press the STOP button
X
once.
* The red LED above button
X
lights.
* The values remain visible in the displays.
* Press the START button
W
.
* The sieving process will be resumed.
Stop (standby function): Fig. 2
* Press the STOP button
X
twice
* Red LED above button
X
lights.
* The entire display goes out.
* Activate the LED displays: press button
W
once.
* New values can now be entered.
* Press the START button
W
a second time
* The same function will be executed as with the
start
function.
