Page 34 of 91
© Retrotec 2017
Figure 37: Set the [Area] needed for "per Area" type Results from the Home screen
The
[Area]
key on the “Settings” menu provides a
nother way to enter the area of the enclosure or building
under test. The key on the “Settings” menu operates exactly the same as the
[Area]
key on the
Home
screen, but allows the user to enter the area without changing the
“
Result to be displayed
”
to one of the
normalized or permeability results to make the
Home
screen
[Area]
key appear.
Figure 38: Set the [Area] needed for "per Area" type Results from [Settings]
4.3
Set [Volume] if using ACH
The volume of the enclosure or building under test is required for the calculation of ACH (Air Changes per
Hour).
The [Volume] key will appear on the Home screen if ACH is chosen as the “Result to be
displayed”.
