14
Copyright © 2017 Retro Manufacturing, LLC
Low Pass Filter (LPF) Frequency Range
Fuses* (fuse door on bottom of amplifier)
Dimensions (inches)
Dimensions (mm)
SPECIFICATIONS
Full-Range Power Output @ 4 ohms
Full-Range Power Output @ 2 ohms
Subwoofer Power Output @ 4 ohms
Subwoofer Power Output @ 2 ohms
Full-Range Frequency Response
Subwoofer Frequency Response
Bass Boost
Signal to Noise Ratio (EIA rated)
Input Sensitivity
Crossover Slope
High Pass Filter (HPF) Frequency Range
65 watts RMS x 4 channels @ 4 ohms
95 watts RMS x 4 channels @ 2 ohms
225 watts RMS x 1 channel @ 4 ohms
330 watts RMS x 1 channel @ 2 ohms
40Hz - 65KHz
24Hz - 250Hz
0-12dB @ 50Hz
>95dB
200mV - 6.0 volts
24dB
40Hz - 400Hz
50Hz - 250Hz
30 amp ATC Style (x2)
12.9” W x 5.3” D x 1.87” H
330mm W x 134mm D x 47.5mm H
TECHNOPHONIC
SPECIFICATIONS
Due to continuing improvements, specifications are subject to change without notice.
*An additional 60 amp fuse (not included) must be used on the Battery (+) wire at
the battery. The fuse must be placed as close as possible to the positive (+) battery
terminal (within 6-8 inches away).
Total Harmonic Distortion
<0.2%
