9
POWER AND SPEAKER CONNECTIONS - STANDARD
WIRING DIAGRAM
Connect to
chassis/frame of car
(close to amp)
60 amp fuse
(not included)
Place fuse as close to terminal as possible
CH 1+
BRIDGE
BRIDGE
CH 1
CH 2
CH 3
CH 4
CH 5
POWER
REMOTE
GROUND
PROTECT
CH 2-
CH 3+
CH 4-
+
-
+
-
Battery
16-18 gauge
+12 volt turn-on lead
from radio
8 -10 gauge
+12 volt constant
to battery
STANDARD WIRING
8 -10 gauge
negative ground
Subwoofer
(2 or 4 ohm)
Left
Speaker
(4 ohm)
Right
Speaker
(4 ohm)
Left
Speaker
(4 ohm)
Right
Speaker
(4 ohm)
NOTE: The fuses included with the amplifier only protect the amplifier itself. Installing a fuse
near the battery is required to protect your vehicle and wiring in case of a short-circuit.
Check the fuses on the bottom of the amplifier for troubleshooting (30 amp ATC style).
CAUTION: It is very important that you use the same gauge wire for both the Battery (+)
(12 volt constant) and the ground.
