14
Copyright © 2017 Retro Manufacturing, LLC
Bass Boost
0-12dB @ 50Hz
SPECIFICATIONS
Fuse* (fuse door on bottom of amplifier)
Dimensions (inches)
Dimensions (mm)
Full-Range Power Output @ 4 ohms
Full-Range Power Output @ 2 ohms
Subwoofer Power Output @ 4 ohms
Subwoofer Power Output @ 2 ohms
Full-Range Frequency Response
Subwoofer Frequency Response
Signal to Noise Ratio (EIA rated)
Input Sensitivity
Crossover Slope
High Pass Filter (HPF) Frequency Range
Low Pass Filter (LPF) Frequency Range
65 watts RMS x 2 channels @ 4 ohms
90 watts RMS x 2 channels @ 2 ohms
170 watts RMS x 1 channel @ 4 ohms
229 watts RMS x 1 channel @ 2 ohms
40Hz - 65KHz
24Hz - 250Hz
>95dB
200mV - 6.0 volts
24dB
40Hz - 400Hz
50Hz - 250Hz
30 amp ATC Style
9.4” W x 5.3” D x 1.87” H
240mm W x 134mm D x 47.5mm H
STEREOPHONIC
SPECIFICATIONS
Due to continuing improvements, specifications are subject to change without notice.
*An additional 30 amp fuse (not included) must be used on the Battery (+) wire at
the battery. The fuse must be placed as close as possible to the positive (+) battery
terminal (within 6-8 inches away).
Total Harmonic Distortion
<0.2%
