background image

www

.

retromanufacturing

.com

Your Power Antenna comes with a manufacturer’s warranty covering any defects in materials and 

workmanship. Retro Manufacturing, LLC  (collectively referred to as “the warranter”), at its option, will 

either (a) repair your unit with new or refurbished parts or (b) replace it with a new or refurbished unit. 

The warranty period starts from the original purchase date and is valid for the length of time indicated 

in the chart below. The decision to repair or replace will be made by the warranter.

ITEM

ITEM

WARRANTY

WARRANTY

Antennas

One (1) Year

During the “Parts” warranty period, there  will be no charge for parts. You must mail in your unit during 

the warranty period at your expense. This warranty only applies to products purchased directly from 

Retro Manufacturing or an authorized dealer. This warranty is extended only to the original purchaser 

of a new product that was not sold “as is.” A purchase receipt or other proof of the original purchase 

date is required for warranty service.

To handle a warranty issue, contact us at 

[email protected]

 or 

888.325.1555

 for a 

Return Authorization (RA) number. A RA number must accompany all returns and warranty issues. 

Any product received without a RA number will be refused. 

LIMITED WARRANTY-LIMITS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials and workmanship and DOES 

NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER 

damages that occurred during shipment, failures which are caused by products not supplied 

by the warranter, failures that result from accident, misuse, abuse, neglect, bug infestation, 

mishandling, misapplication, alteration, faulty installation, set-up adjustment, maladjustment of 

consumer control, improper maintenance, improper antenna, inadequate signal reception or 

pickup, power line surge, improper voltage supply, lightning, modification, commercial use (such as 

use in hotels, offices, restaurants, or other business uses) or rental use of the product, or service 

by anyone other than Retro Manufacturing, LLC, or damage that is attributable to acts of God. 

 

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY. 

THE WARRANTER IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES 

RESULTING FROM THE USE OF THIS UNIT OR ARISING OUT OF ANY BREACH OF 

THIS WARRANTY. (As examples, this excludes damages for lost time, the cost of having 

someone remove or re-install an installed unit if applicable, travel to and from the servicer, and 

loss of media, data, or other memory contents. The items listed are not exclusive but are for 

illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY 

OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. 

 

Some states do not allow the exclusion or limitation of incidental or consequential damages or 

limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This 

warranty gives you specific legal rights, and you may also have other rights which vary from state to 

state. If a problem with this unit develops during or after the warranty period, you may contact your 

dealer or Retro Manufacturing, LLC.

©2020 Retro Manufacturing, LLC | Published: 01/19/22

7470 Commercial Way, Henderson, NV 89011

Phone: 888.325.1555 • Fax: 702.483.2229

Warranty

Summary of Contents for PA02

Page 1: ...llation possibility vehicle or aspect of the installation process Retro Manufacturing LLC or its subsidiaries assume no responsibility for proper or improper installation Every attempt has been made to make this installation guide as informative as possible This guide may be updated from time to time and specifications are subject to change without notice Please check our website help retromanufac...

Page 2: ...p to mount the motor assembly 6 Attach the black ground wire to the chassis Be sure the ground wire is attached to a clean mounting point for proper operation If the ground wire is not grounded correctly the antenna will not function 7 With the bottom of the antenna motor assembly secured the mast at the desired angle and the adjustable mounting base resting evenly on the underside of the fender t...

Page 3: ...itched wire from radio Ignition switch Unswitched Battery Adjustable Mounting Base Metal Retainer Cup Mounting Nut Angle Base Antenna Input From Radio Flexible mast cable Motor Assembly Drain Tube Mounting Hole Wiring to Radio Metal Strap Antenna Mast Fender 0 8 23 3 15 30 Included mounting bases Figure 1 Adjustable Mounting Base Metal Retainer Cup Mounting Nut Antenna Mast Base Underside of Fende...

Page 4: ...ied by the warranter failures that result from accident misuse abuse neglect bug infestation mishandling misapplication alteration faulty installation set up adjustment maladjustment of consumer control improper maintenance improper antenna inadequate signal reception or pickup power line surge improper voltage supply lightning modification commercial use such as use in hotels offices restaurants ...

Reviews: