background image

Information and specifi cations outlined in this manual in effect at the

time of printing of this manual. ECR International reserves the right to

discontinue, change specifi cations or system design at any time without 

notice and without incurring any obligation, whatsoever.

TABLE OF CONTENTS

Table Of Contents ........................................................................................................... 2
Receiving Information ..................................................................................................... 3
Important Safety Information ........................................................................................... 4
Dimensional/Physical Data ............................................................................................... 5
Product Description ......................................................................................................... 9
General Product Information .......................................................................................... 11
Installation Preparation ................................................................................................. 12
Installation .................................................................................................................. 13
Final Inspection And Start-Up ......................................................................................... 14
Sequence Of Operation.................................................................................................. 17
Maintenance  ............................................................................................................... 19
Performance Data CM / CW / WM ** ............................................................................... 21
Electrical Speci

fi

 cations ................................................................................................. 22

The Right Fit for Comfort

 

2

 

Made in USA

Summary of Contents for CM





























Reviews: