manualshive.com logo in svg

Retra REALEZY 320 Series, Owner'S Operation And Maintenance Manual

Share
Download
Retra REALEZY 320 Series Owner'S Operation And Maintenance Manual Download Page 4

1     

Installation

Warranty

Real Ezy Hose Reels manufactured by Retra Group Pty Ltd are warranted to be free of defects in material 

and workmanship for 10 years from the date of invoice or delivery (whichever is earlier). 

Retra Group Pty Ltd’s warranty does not cover damage caused by accident, misuse, use in applications 

other than that for which the Reel was designed, unauthorised modification, faulty installation, or fair 

wear and tear. 

Retra Group Pty Ltd’s Real Ezy Hose Reels must be installed and maintained in accordance with the

instruction manual supplied with each reel, otherwise, the warranty may not be applicable.

Electric motors will be of merchantable quality and free from any defects in material and workmanship 

(fair wear and tear excluded) for a limited period of 12 months from the date of delivery.

The warranty for swivel O-rings is limited to 12 months.

Hoses and nozzles are not covered by our warranty as these are warranted by the respective hose and 

nozzle manufacturers.

To get replacement or repair parts under the warranty, email 

[email protected]

 and include

any relevant information regarding the fault. Include images of the fault if possible and specify the serial

number and model number of the reel. This information is found stamped into a plaque on the front 

right-hand side A-frame leg. 

Please note shipping and handling fees may be applicable in some instances, these are assessed on a 

case-by-case basis. 

Summary of Contents for REALEZY 320 Series

























Reviews:

No comments

Brands by name

Popular brands

Load more brands