15
Operating
Press the RESET button (4) after exchanging the battery to reset the clock and
to start a new initializing process.
Explanation of the symbols inside the radio-controlled wall clock
in
Indoor Temperature Display
OUT Outdoor
Temperature
Display
Replace Battery of Transmitter!
Radio Reception Symbol
CH
Sensor
Channel
Automatic Channel Sequence Mode
Operating the radio-controlled wall clock
1. Insert two batteries of the type LR6, 1.5 V (AA) into the battery compartment
(A6). For 3 seconds all symbols appear on the indoor temperature display
(A2) and on the outdoor temperature display (A3) to confirm proper function.
The indoor temperature immediately appears on the indoor temperature dis-
play (A2).
2. Press the reverser (A4) in order to change between °C and °F.
Operating the transmitter
1. Unscrew the four screws from the battery compartment of the transmitter (B1)
with a suitable crosstip screwdriver.
2. Open the battery compartment (B4) and insert 2 batteries of the type LR6
1.5 V (AA), observing right polarity.
On the display (B2) all symbols appear for two seconds and confirm proper
function of the transmitter.
The current temperature automatically appears on the display of the
transmitter.
If the LED flashes (B3), the radio signal is transmitted and you will see for one
second a small radio symbol.
3.
Before closing the battery compartment again, select the favoured tempera-
ture unit. Press the reverser to choose °C or °F (B6).
Summary of Contents for 367524
Page 1: ...Westfalia Bedienungsanleitung Nr 107465 ...
Page 16: ...11 Notizen ...
