VI
Instruction Manual
Setting the Time and Date
1. Pull out the crown (C) by one position. Turn the crown
clockwise to setup the date.
2. Pull out the crown by two positions and turn the crown
either clockwise or counter clockwise to setup hour and
minute hands.
3. Finally push the crown back in.
Notes:
Manually adjust the date at the end of months with
28, 29 or 30 days.
If the date is set at a time between 21:00 o’clock and
01:00 o’clock, it may occur that the date does not change
the next day. Therefore set the date outside this period of
time.
Setting up the Stop Watch Hands
In case the hands of the stop watch do not properly reset
to “zero” after resetting the stop watch, reset the hands
manually to zero.
1. Pull out the crown (C) by 2 positions.
2. Press and hold key A (reverse) or key B (forward) until
all hands are reset to zero.
3. Finally push the crown back in.
