VII
Instruction Manual
Using the Stop Watch
1. Press key A to start measuring time.
2. Press key A again to stop measuring time.
3. Press key A once more in case you want to continue
measuring time starting from the stopped position.
4. Press key B during an active measurement to display
an intermediate time, and press B once more to
continue.
5. Press key B after measuring time has stopped, to reset
the hands of the stop watch.
Watchband
To open the watchband
completely lift up the safety
bracket (D). Then lift up the
clasp (E).
To close the fold-over the
clasp and press it down until
the clasp audibly snaps in. Then fold-over the safety
bracket.
To shorten the watchband to the desired length, use a
suitable link remover or similar tool (e.g. Art. No.
849067 or 804823).
For fine adjustment of the watchband length, set the
spring bar in the clasp into the desired hole.
D E
