19
18
• DO NOT transmit for more than 50% of total radio use time, more than
50% of the time can cause RF exposure compliance requirements to be
exceeded.
• During transmissions, your radio generates RF energy that can possibly
cause interference with other devices or systems. To avoid such interfer-
ence, turn off the radio in areas where signs are posted to do so.
• DO NOT operate the transmitter in areas that are sensitive to electroma-
gnetic radiation such as hospitals, aircraft, and blasting sites.
• Portable Device, this transmitter may operate with the antenna(s) docu-
mented in this filing in Push-to-Talk and body-worn configurations. RF
exposure compliance is limited to the specific belt-clip and accessory
configurations as documented in this filing and the separation distance
between user and the device or its antenna shall be at least 2.5 cm.
• Mobile Device, during operation, the separation distance between user
and the antenna subjects to actual regulations, this separation distance
will ensure that there is sufficient distance from a properly installed
externally-mounted antenna to satisfy the RF exposure requirements.
• Occupational/Controlled Radio, this radio is designed for and classified
as “Occupational/Controlled Use Only”, meaning it must be used only
during the course of employment by individuals aware of the hazards,
and the ways to minimize such hazards; NOT intended for use in a
General population/uncontrolled environment.
• General population/uncontrolled Radio, this radio is designed for and
classified as “General population/uncontrolled Use”.
RF Exposure Compliance and Control Guidelines and
Operating Instructions
To control your exposure and ensure compliance with the occupational/
controlled environment exposure limits, always adhere to the following
procedures.
• Disposal
The crossed-out wheeled-bin symbol on your product, literature,
or packaging reminds you that in the European Union, all electrical
and electronic products, batteries, and accumulators (rechargeable
batteries) must be taken to designated collection locations at the
end of their working life. Do not dispose of these products as unsorted
municipal waste. Dispose of them according to the laws in your area.
IC Requirements
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
RF Exposure Information
• DO NOT operate the radio without a proper antenna attached, as this
may damage the radio and may also cause you to exceed RF exposure
limits. A proper antenna is the antenna supplied with this radio by the
manufacturer or an antenna specifically authorized by the manufacturer
for use with this radio, and the antenna gain shall not exceed the
specified gain by the manufacturer declared.
Summary of Contents for RT28
Page 2: ...EU Importer Name Germany Retevis Technology GmbH Address Uetzenacker 29 38176 wendeburg ...
Page 4: ......
Page 5: ......
Page 6: ......