background image

Setting the SQUELCH Level 1-6

1. Press       six times or until SL displays.

2. Press UP or DOWN to select the receive sensitivity

    level.

    01 = 

High receive Sensitivity

    02~05 = 

Medium receive Sensitivity

    06 = 

Low receive Sensitivity

Setting the TX POWER LO/HI

1. Press       seven times until pr displays.

2. Press UP or DOWN to select the LO or HI level.

3. Press PTT to save the TX POWER LO/HI setting.

Important Information on Safe and Efficient 

Operation Read. This Information Before Using 

Your Radio

The information provided in this document supersedes 

the general safety information contained in user guides 

published prior to July 2000.

Transmit and Receive Procedure 

Your two-way radio contains a transmitter and a 

receiver. To control your exposure and ensure 

compliance with the general population/uncontrolled 

environment exposure limits, always adhere to the 

following procedure:

• Transmit no more than 50% of the time.

• To transmit (talk), press the Push to Talk (PTT) button.

• To receive calls, release the PTT button.

Transmit no more than 50% of the time, or less, is 

important because the radio generates measurable RF 

energy exposure only when transmitting (in terms of 

measuring standards compliance).

Exposure to Radio Frequency Energy

Your radio is designed to comply with the following 

national and international standards and guidelines 

regarding exposure of human being to radio frequency 

electromagnetic energy:

Two-Way Radio Operation 

When using your radio as a traditional two-way radio, 

hold the radio in a vertical position with the microphone 

one to two inches (2.5 to 5cm)  away from the lips.

Facilities

To avoid electromagnetic interference and/or

compatibility conflicts, turn off your radio in any facility 

where posted notices instruct you to do so.

Hospitals or health care facilities may be using 

equipment that is sensitive to external RF energy.

Aircraft

When instructed to do so, turn off your radio when on 

board an aircraft. Any use of a radio must be in 

accordance with applicable regulations per airline crew 

instructions.

Potentially Explosive Atmospheres

Turn off your radio prior to entering any area with a 

potentially explosive atmosphere. Do not remove, 

install, or charge batteries in such areas. Sparks in a

potentially explosive atmosphere can cause an 

explosion or fire resulting in bodily injury or even death.

Note: The areas with potentially explosive atmosphere  

5

Safety and General Information

MENU

MENU

Summary of Contents for RT-628















Reviews: